particular interest in the attached message as our networker
installation runs badly as well. I don't know if the patch helped as
ultimately it turned out the SCSI id selector on the device was broken.
Tahnks again.
Regards,
Stpehen.
S Johnston wrote:
>
> Can some confirm this is the correct entry in the /kernel/drv/st.conf
> file for this device?
>
> tape-config-list=
> "SUN DLT4000", "Quantum DLT 4000", "QDLT";
> QDLT =1,0x36,0,0xD639,4,0x80,0x81,0x82,0x83,2;
>
Don't know if you have got many reply yet, probably knowing this list.
We usually
get things the next day here in Australia.
You need to put in the patch 103857-08. It fixed all of our DLT
problems. We
use Networker and fsf would take 1 hour, now they take seconds!
I looked at the st.conf file ( the patch changed it) and it looks like:
"Quantum DLT4000", "Quantum DLT 4000", "DLT4",
DLT4 = 1,0x38,0,0xd639,4,0x80,0x80,0x80,0x81,3;
It is a "Sun" DLT.
-- Stephen Johnston Phone: +49 89 32006 443 UNIX Sysadmin Fax: +49 89 32006 380 SERCO GmbH at European Southern Observatory Karl-Schwarzschild-Strasse 2 mailto:sjohnsto@eso.org D-85748 Garching bei Muenchen http://www.eso.org