Sorry for beeing late with this summary. THANKS VERY MUCH TO ALL WHO REPLIED.
My original question is here:
---------------------------------------------------
Hello everyone,
I have a question about CDE :
Can CDE run on a Sparc with a parallax card ?
OpenWindows can run no problem on a machine with this card, but CDE ... ?
TIA,
----------------------------------------------------
>From edz@bsn.com (Edward C. Zimmermann)
If you running Solaris 2.x then it should be fine...
Its the same thing: X11!
If it can run OpenWindows its running Xsun and CDE is just another window
management and lib...
----------------------------------------------------
>From Anthony.Worrall@reading.ac.uk (Anthony Worrall)
Hi
I have a parallax working with CDE with out any problems. In fact I think it
is easier because the users do not have to do anything special to use it.
You just need to modify /etc/dt/config/Xservers to set the framebuffer.
(copy from /usr/dt/config if needed).
The last line should look something like
:0 Local local_uid@console root /usr/openwin/bin/Xsun -dev /dev/fbs/tvtwo0 -nominexp
-nobanner
For some reason the parallax install script links /dev/fb (the default
framebuffer) to the ccube jpeg-codec device! So you should use /dev/fb0
which links to /dev/fbs/tvtwo0. (The nominexp option is a workaround
for a problem of windows using the 8bit overlay).
--------------------------------------------------------------------
>From Dave Staggs <dstaggs@kcii.com>
>
> I have a question about CDE :
>
> Can CDE run on a Sparc with a parallax card ?
>
yes it can with little difficulty.
> OpenWindows can run no problem on a machine with this card, but CDE ... ?
if it is working with openwindows, it should with cde.
---------------------------------------------------------------------
>From Colleen Nielsen <colleen@parallax.com>
Hello,
Yes, definitely Parallax supports CDE. In our software installation
guide, it's described on page 11-12. We only support CDE on
Solaris 2.5, with our Solaris 2.5 software.
The file to edit is /usr/dt/config/Xservers; I have attached
the end of this file showing the different permutations; this file must
be edited for CDE to run properly.
# for an XVideo, 24-bit mode
# :0 Local local_uid@console root /usr/openwin/bin/X -dev
/dev/fbs/tvtwo0 defdepth 24
# for multiheaded with an XVideo and a cgsix
# :0 Local local_uid@console root /usr/openwin/bin/X -dev
/dev/fbs/tvtwo0 -dev /dev/fbs/cgsix0
# :0 Local local_uid@console root /usr/openwin/bin/X :0 -dev
/dev/fbs/tvtwo0 right -dev /dev/fbs/cgsix0 left
# for an XVideo, 8-bit mode
# :0 Local local_uid@console root /usr/openwin/bin/X -dev
/dev/fbs/tvtwo0
# POWERVIDEO in leftmost slot
# :0 Local local_uid@console root /usr/openwin/bin/X -dev
/dev/fbs/tvtwo1
# POWERVIDEO in rightmost slot
# :0 Local local_uid@console root /usr/openwin/bin/X -dev
/dev/fbs/tvtwo2
# the original line in the Xservers file
:0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -nobanner
--------------------------------------------------------------------------