I have a Sparc 10 running Solaris 2.6 that kept crashing to the prom
level (init 0). There is NO error in the system log. The only
indication is:
fat
Watchdog Reset
on the console. So far I can't seem to find info on Watchdog Reset
on any reference manual. Does anybody knows what this mean and how
to correct the problem?
===========
SOLUTION(s)
===========
Many thanks to all those have replied. I apologize if I missed
anyone.
Venkat D <venki21@hotmail.com>
Kathy Kost <kathyk@WOLFENET.com>
Joel Lee <jlee@thomas.com>
Carlo Musante <carlo@hub.eng.wayne.edu
Sanjay Srivastava <sanjays@netcom.com>
Benjamin Cline <benji@hnt.com>
Max Trummer <trummer@cts.com>
Serguei I.Revtov <sir@cb.tver.ru>
Mark.Parry <mark.parry@research.natpower.co.uk>
Antonia Gomez <antonia@fib.upc.es>
David Thorburn-Gundlach <david@bae.uga.edu>
Mike Salehi <mrs@cadem.mc.xerox.com>
Watchdog reset is hardware trap that sent an interrupt to the CPU
to prevent further damage when there is some kind of hardware
problem. Hardware problems that frequently occurred are:
1. Over heating.
2. Memory error.
**NOTE**
1. Watchdog can be disabled by setting "watchdog-reset" to false
at your eeprom. This can be a "doable" solution but personally
I would not recommend this.
2. Perform diagnose at the prom level by running ctrace, .registers,
.psr, or .locals.
Thanks,
--John
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/ John Nguyen _/ Electronic Data Systems _/
_/ Senior Systems Engineer _/ Internet & New Media _/
_/ jnguyen@inm.eds.com _/ http://www.inm.eds.com _/
_/ Pager: (214) 759-5435 _/ 5400 Legacy Drive _/
_/ Phone: (972) 604-1685 _/ Plano, TX 75024 _/
_/ Fax: (972) 604-7969 _/ Mail Stop: B4-2A-15 _/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/